X-ray leakage: <1mGy/h (150kV, 4mA)
The distance from the focus of the X-ray tube to the beam limiter mounting surface: 60mm (can be adjusted according to different tubes)
Light field consistency: <2%@SID
Inherent filtration: 1mmAl/75kV
Optional:
External additional filter
Special electrical interface
Special tube ball interface
|
Max Voltage |
150KV |
|
Maximum X-ray field coverage range |
440mmx440mm (SID=100cm) |
|
The average brightness of the light field |
>160 lux |
|
Edge contrast ratio |
>4:1 |
|
Power supply requirement of projection lamp |
24V/100W |
|
Bright X-ray field duration for Once |
30S |
|
Distance from Focal Spot of X-ray tube to the mount plane of collimator SID (mm)(optional) |
60 |
|
Filtration(Inherent) 75kV |
1mmAl |
|
Filtration(Additional) |
The outer optional |
|
Control method |
Manual |
|
Drive motor |
-- |
|
Motor Control |
-- |
|
Position detection |
-- |
|
Input power |
AC24V |
|
(SID)Measuring tape |
Standard Configuration |
|
Center laser instructions |
-- |
|
Dimension(mm)(W×L×H) |
223x185x87 |
|
Weight(Kg) |
5.5 |
This x-ray collimator is suitable for common X-ray diagnostic equipment with a tube voltage of 150kV, DR.