| Max Voltage | 150KV |
| Maximum X-ray field coverage range | 430mm×430mm (SID=100cm) |
| The average brightness of the light field | >160 lux |
| Edge contrast ratio | >4:1 |
| Power supply requirement of projection lamp | 24V AC/150W |
| Bright X-ray field duration for Once | 30S |
| Distance from Focal Spot of X-ray tube to the mount plane of collimator SID (mm)(optional) | 60 |
| Filtration(Inherent) 75kV | 1mmAl |
| Filtration(Additional) | The outer optional |
| Control method | Electric/ Manual |
| Drive motor | Stepper Motor |
| Motor Control | TTL Level signals |
| Position detection | Potentiometer |
| Input power | AC24V/DC24V |
| (SID)Measuring tape | optional |
| Center laser instructions | optional |
| Dimension(mm)(W×L×H) | 185×230×145 |
| Weight(Kg) | 7.2 |
X-ray leakage: <1mGy/h (150kV, 4mA)
The distance from the focus of the X-ray tube to the beam limiter mounting surface: 60mm (can be adjusted according to different tubes)
Maximum irradiation field: 43cmX43cm (SID=1m)
Minimum irradiation field: <5cmX5cm (SID=1m)
Visible light field brightness: >140lux (SID=1m)
Light field consistency: <2%@SID
Inherent filtration: 1mmAl/75kV
Light field power input: 24VAC/50W or DC24V/1A
Electrical control power input: 24VDC/2A
CAN bus protocol: CAN2.0A
Dimensions: 186mm×230mm×145mm (length×width×height)
Weight: 7.2kg
Optional:
External additional filter
Special electrical interface
Special tube ball interface
This x-ray collimator is suitable for tube voltage 150kV, DR digital and common X-ray diagnostic equipment